(as of Apr 16,2021 22:16:29 UTC – Details)
80pcs blue connectors, Cable cross-section 1.5-2.5 mm² (AWG 16-14)
80pcs red connectors, Cable cross-section 0.5-1.0 mm² (AWG 22-18)
40pcs white connectors, Cable cross-section 0.25-0.34 mm² (AWG 26-24)
Waterproof – Dual-Walled tubing ensures waterproof seal and prevents wire corrosion. Hot melt adhesive & solder inside, sealed with advanced waterproof function.
Easy to use – Just strip your wires, insert them into the connector and apply heat. Transparent sleeve provides precise inspection, easy control soldering process.
No Slip Wire Contact – Tubing reduces in size and solder will melt and flow through the stripped wires, ensure strong holding, avoids wires slipping out from the terminal.
Great wiring solution for hard to reach or limited space areas. Make properly soldered and waterproof connections in less than 30 seconds.
Wide Applications – Ideal used for vehicle, motorcycle, boat, DIY electrical wirings and other outdoor applications.
Instructions for use:
1.Strip 1/3 inch of wire insulation at both ends. Insert the solder sleeve and twist the strands together.
2.Use a hot air gun to continuously rotate the connector to heat evenly around the solder until it flows into the wiring harness.
3.Then heat at both ends of the pipe until the adhesive flows and seals the wires.
4.It emits heat, wait for it to cool down before use.
Note: It is recommended to use a 1500-2000W heat gun during heating and keep it at a distance of 3-5cm from the welding connector. If the temperature is too high, the wire connector can easily break.
Shrinkage ratio 2:1.
Waterproof Rating: IP67.
Material: Polyolefin Tubing with Solder and hot melt adhesive Inside.
Minimum temperature for solder to melt: 280°F / 138°C
【Double-wall Heat Shrink Wire Connectors】- Polyolefin tubing outside and hot melt rings inside. Solder Seal wire connectors provide protection for wires and cables from abrasion, cuts, scratches and low-impact conditions. Comply with SGS and CE standards.
【High Quality Solder Seal Ring】- At high temperatures, the solder ring will melt to generate enough solder to wrap the wire to form a seal. This can enhance the conductivity and ensure a long-term connection.
【Weatherproof】- Hot melt Adhesive can provide enough adhesive to hold the wires tightly. After cooling and hardening, its bonding strength can be reached within a few seconds. It has weatherproof performance and prevents wire corrosion.
【Simple Operation】- No need for crimp tools and soldering machine. Simply put the stripped wire into the solder sleeve and heat it to complete the connection.
【Wide Applications】- Ideal used as marine electrical connectors, automotive, vehicle, motorcycle, boat, household, DIY quick splice wire connectors and other outdoor applications. Package contains-200pcs Solder Seal Butt Connectors (80pcs Blue, 80pcs Red, 40pcs White)